Are Your Shoulders Ready for Brazilian Jiu Jitsu?

I have been keeping busy down here in Miami, Florida. I am about a quarter of the way through my first semester as a PhD student and I have been kept busy with teaching my first class (Introduction to Athletic and Sport Injuries) and by being a research assistant for my adviser as well. I have also had the opportunity to keep myself busy yet physically active by taking back up a long-lost but much loved hobby of mine: Brazilian Jiu Jitsu (BJJ).

BJJ took a backseat for me after training regularly during my bachelor's degree. It stayed on the back burner as I worked on my master's degree but my schedule has normalized enough to allow me to resume training. My sports medicine breadth of knowledge has grown and advanced while my BJJ was placed on hold, and because of that I feel that I have a expanded view on the biomechanics of the sport that I didn't necessarily have previously.

Specifically, I am going to touch briefly on a bit of injury prevention for anyone out there that may be into BJJ or for those of you that may treat people that participate in BJJ (actually this stuff applies to everybody not just BJJ guys). Nevertheless, this post is definitely geared more for the BJJ practitioner and not the clinicians out there...this may not even be new information for those who have visited this blog before.

While I am not somebody that you should go to for submission or any BJJ advice for that matter...I feel that I can give some good insight to help you stay on the mats. Specifically, when I was training I often saw a lot of people struggle with shoulder injuries. In fact, traumatic shoulder dislocations and subluxations were more prevalent than one might assume. Perhaps one wouldn't be surprised considering this is a sport where people enjoy catching each other in joint locks and submission-holds that work by forcibly placing one another's joints at their respective end ranges of motion. So when it comes to a sport where we are already pushing the limits with our body (within reason) then we need to ensure that we are not already at risk of damaging ourselves or our training partners.

I'm no Kenobi.

Having strong, mobile, and stable shoulders is just as important for your ability to submit as well as your ability to not get submitted. The status of your shoulders can also have repercussions up and down the kinetic chain. This is evident when a shoulder issue can manifest itself as a grip strength (I won't be touching on it in this post but proper grip strength can also play a huge role on proper shoulder stability) problem. Not to mention proper shoulder function, especially based upon the tests that I am about to show you, is entirely interdependent on proper function of the elbow joint, glenohumeral (shoulder) joint, the scapula (shoulder blade), the thoracic spine, and arguably the neck or cervical spine as well.

You can bet this guy needs some help, even if he doesn't have symptoms...yet.

So what is a quick an easy way to check for potential shoulder dysfunction? If you know me by now you know I am a fan of the Selective Functional Movement Assessment (SFMA) and think its a great way for everybody to look at movement despite the fact that we may all treat movement in many different ways. So that is where these tests originate!

1) Upper Extremity Pattern #1

What does this shoulder position look like?

This test requires adequate motor control and mobility of many different segments including: Shoulder internal rotation, shoulder extension, and horizontal adduction of the shoulder. Additionally it requires elbow flexion and thoracic spine extension/rotation. Any issues found here indicate a potential stability and/or mobility problem. One must not assume that it is a mobility/flexibility issue that needs stretching or cranking on.

Looks a lot like our test above...If you can't easily put your own arm here, how do you expect it to feel when does it for you?

What is a passing test? The ability for the finger tips to reach the inferior angle of the contralateral scapula without excessive scapular winging of the moving arm, without excessive effort, no deviations in starting posture, and a symmetrical result when compared to the other side. A failing test would require a local biomechanical assessment and to break down of the components of the movement to search for the weakest link. This is a normal range of motion to be able to move through. Deficiency here can lead to increased strain, tension and shearing forces through your upper extremity and its soft tissues.

#2) Upper Extremity Pattern #2

For this test you need adequate shoulder external rotation, shoulder abduction, shoulder flexion, and elbow flexion on top of thoracic extension/rotation as well. To pass this test you must be able to reach your fingers to your contralateral scapula. Where at on the scapula? The midpoint of the spine of your scapula is our targeted destination. However, you need to look for symmetry of movement from side to side, check out how much effort is required, and if there is any deviation of posture to achieve this position. Additionally, a person is not allowed to "crawl" their hands up or down their back for either test. It has to be done with one smooth motion and without "warming" up.

This is not the same as Upper Extremity Pattern #2 but it IS the same. Get it?

If you want a quick and easy way of doing this if you are unsure of your anatomical landmarks just grab yourself a tape measure and assess the distance from your longest finger tip to the first wrist "crease" or wrinkle of your wrist just below your palm. Got that measurement? Okay well you want your hands to be within 1.5 times that measurement to be considered acceptable and don't forget to switch arms and check both ways.

So what do you do if fail these tests? That is a debate for another day but you honestly need more information. However, if you want to use a trial-and-error method then all you need to do is try something out like flopping on a foam roller, lacrosse ball, or getting a massage and seeing if there is  a difference afterwards. How will you know if there is a difference? Retest! Mobility may work may not fix this so don't assume that is what it is! It could just as easily be a motor control or stability issue. Here is a sample of what breaking down one of these tests looks like.

While these tests are far from all-inclusive or the be-all-end-all they are a great starting place to screen or assess for potential risk of injury. If you can do this it doesn't mean you won't injury your shoulder or that you are 100% good to go but if you can't I do know that you deviate from normal into abnormal. Abnormal or dysfunction in my book is the same as pathological and may lead to future injury down the road. Get to work on bullet-proofing your shoulders before it is too late and you are under the scalpel.

!!Update!!

 Some people asked for a video to help clarify a few questions that they had regarding this post and I have finally gotten the time to deliver. Here it is...

Read More

Please Leave Your Poor Hamstrings Alone!

"Tight Hamstrings, The Epidemic That Never Existed."

 -Dr. Erson Religioso, DPT

Trying to touch my toes at my first SFMA seminar.

This little nugget of knowledge developed during a conversation that my good friend Dr. E of The Manual Therapist and I were having together after his recent post. It is crazy how many times you will hear people mention how tight their "hammies" are or how often you can look at people exercising in public and the only thing they stretch is their hamstring group after some light arm circles. It is bewildering to me sometimes.

I think there is a real epidemic in progress and is growing at an exponential rate. However, the epidemic is NOT hamstring tightness...The real epidemic is a plethora of people, old and young alike, that can not touch their toes. Touching your toes without bending your knees is...or should be a fundamental human movement pattern. I know many of us fear lumbar motion and especially extreme lumbar flexion but spinal (that includes lumbar) motion is completely normal and necessary. We aren't talking about lumbar flexion under load here.

On top of the population of people that can not touch their toes...there are plenty of people that can do so. However, I didn't say everyone that could do this was able to do it satisfactorily. Using the Selective Functional Movement Assessment (SFMA) standards a person should be able to touch their toes without bending the knees, should have a uniform spinal curve throughout all of the spinal segments, have a sacral angle of > 70 degrees, and should utilize a posterior weight shift or hip hinge to achieve this goal. An inability to achieve this pattern satisfactorily represents an inability for athletic movements such as the deadlift, and an inability to reflexively stabilize the spine.

So what does this have to do with hamstrings? Most people that can not touch their toes often jump the gun and assume that it is due to posterior chain tightness or tight hamstrings. In reality, this is rarely the case. In fact, I would recommend you always get a second opinion or never evaluate yourself. I actually made this mistake myself and it was evident in a previous post where I did an SFMA video of my own multi-segmental flexion (toe touch pattern). I was wrong in my assessment and I actually had a core stability/motor control dysfunction.

This wasn't evident to me because during a certain breakout assessment I falsely associated the sensation of neural tension to equal soft tissue tension. I didn't realize my mistake until I was auditing the SFMA certification course for the second time. I volunteered myself to be the case for teaching the multi-segmental flexion breakouts. This SFMA course was being taught by Behnad Honarbakhsh, MPT, BHK, CSCS, CAFCI, CGIMS, DO (c) (whom I thought was brilliant) and low and behold in front of the entire class he humbled me and showed me my true dysfunction. Nobody knew that I was humbled because I didn't discuss my prior self-assessment. However, I probably hadn't touched my toes since I was a toddler before elementary school. Michele Desser and Dr. Todd Arnold quickly took me out into the hallway and had me perfom rolling and core stability exercises for about 5 or so minutes. They then brought me back into the seminar and showcased how I went from being about 14 inches from touching my toes down to about 2 seconds. Later that night, back in the hotel room I practiced some more on my own and was able to touch my toes.

So lets find out where I went wrong really quick to showcase how you can check to see if your hamstrings are tight or not.

Step 1. Check to see if toes can be touched. If not, continue on. 

Why can't I? We don't know. Don't blame the hamstrings yet.

Step 2. Remove Parts and Compare Left to Right. 

Here I unweight one of my legs and check for change. Nothing. Continue on. Still not the hamstrings.

Step 3. Long Sitting Test - Unload body parts. 

Now the hips and below will not be bearing weight and only the spine will be partially loaded against gravity. Still can't touch the toes? Continue on. (Still not the hamstrings despite my P.E. teachers scolding me for my tight hamstrings as a kid)

Step 4. Unload More, Check Left to Right, and begin Active versus. Passive Comparison.

In this test you are looking for & 70 degrees of hip flexion with both knees remaining straight, feet dorsiflexed, and hips neutral. An inability here STILL is not due to tight hamstrings.

Step 5. Checking Passive Motion compared with Active Motion from the previous step. 

An inability here to increase motion here beyond what you achieved actively = Ding. Ding. Ding. Winner Winner, Chicken Dinner. You DO have tight hamstrings! There are a few more steps you may take after this finding to pinpoint where the mobility dysfunction is located. However, If you increase more than 10 degrees compared to active but still do not reach normal hip flexion (now 80 degrees instead of 70) then you have a mobility and stability/motor control dysfunction present! If you find that you go from ~40 degrees to normal like I do below then you sir...DO NOT HAVE TIGHT HAMSTRINGS. You have a stability/motor control dysfunction. Continue on to step 6.

Step 6. Now you must find out how poor your motor control deficit is.

To pinpoint this you regress yourself to the most basic form of stability and motor control...rolling around on the ground. If you can not roll from supine to prone with each of your different limbs then you have a primitive motor control dysfunction. Restoring the ability to roll may fix your inability to touch your toes. However, at this point we are encroaching on the area of the 4x4 matrix of the SFMA. If you aren't in pain currently then I would recommend you finding an FMS certified professional and get screened and start with working on your most dysfunctional issues there first.

Look at me now...Just a tiny bend in the knees. Working on it. No hamstring stretching needed.

In conclusion, don't evaluate yourself and if you do...Get it rechecked by another set of eyes. The plumbers pipes always leak. Don't be that plumber. Secondly, practice your systems of evaluation or assessment if you have one so you can own it. If you don't use a system how can you be sure you aren't throwing spaghetti against the fridge and hoping that something sticks? What are your metrics for improvement? It has been said a million times and I'll repeat it. You do not need to use these metrics but you should be using something to set a baseline, intervene, and then compare to baseline to check for change.

Read More

Low Back Pain in a Collegiate Basketball Player

Howdy Readers! Today I wanted to take some time to report on a case that I was presented with during this previous basketball season. Then I will discuss how I addressed the case and what I wish that I could have changed about the case. I will also be using my findings from the patient's Selective Functional Movement Assessment (SFMA), and so here is the SFMA acronym legend:

FN: Functional & Non-painful
FP: Functional & Painful
DN: Dysfunctional & Non-painful
DP: Dysfunctional & Painful

Background:

A 21 year old NCAA division III basketball player was competing in a JV basketball game when he suffered a direct blow to the low back by an opposing player's elbow. The supervising athletic trainer (I was busy prepping the varsity team to play) determined there were no gross deformities, ruled out neurological involvement (dermatomes & myotomes WNL), and ruled out any potential fractures. Nevertheless, the player was unable to return to play and finish the game due to pain.

This player had a previous history of catastrophic injury as a high school basketball player when he was undercut by an opponent. He fell on his upper back and hit his head suffering a fractured scapula and traumatic brain injury that lead to him being placed into a medically-induced coma. Additionally, he had a history of low-back pain during high school. The year previous to the current incident this athlete suffered a season-ending concussion as well.

After the game was over this athlete returned to his hometown with his parents. The parents and the athlete planned to see a family friend that is an orthopaedic surgeon in the following days. Upon consulting with the doctor it was revealed to the athlete that he had degenerative joint disease (DJD) in his lumbar spine and he was sent back to me for rehabilitation at my discretion.

Upon hearing this I definitely began to dismiss the DJD because I knew that suffering an elbow to the low back in one game of basketball didn't give this player DJD. I began to talk with the patient about pain science, how it didn't matter if he had DJD because he had it before when he was pain-free, and how we weren't going to attempt to change it. I did discuss how we would perform an SFMA and evaluate in which patterns he was moving dysfunctionally & why they were dysfunctional.

Assessment:

SFMA Top Tier Results & Breakout Findings--
Cervical Flexion = DN: Tissue Extensibility Dysfunction
Cervical Extension = FN
Cervical Rotation = Left - FN / Right - DN: (Tissue Extensibility Dysfunction)
Upper Extremity Pattern 1 = DN (Bilaterally, Left worse than Right): (Functional Shoulder Pattern Stability/Motor Control Dysfunction)
Upper Extremity Pattern 2 = FN (Bilaterally)
Multi-Segmental Flexion = DP (Posterior Chain Tissue Extensibility Dysfunction)
Multi-Segmental Extension = DN: (Thorax Extension Stability/Motor Control Dysfunction, Hip Extension Tissue Extensibility Dysfunction)
Multi-Segmental Rotation = DN (Fundamental Rotational Pattern Stability/Motor Control Dysfunction, Hip ER Tissue Extensibility Dysfunction)
Single Leg Stance = DN (Lower Posterior Chain Tissue Extensibility Dysfunction)
Overhead Deep Squat = DN (Hip and Lower Leg Posterior Chain Tissue Extensibility Dysfunction)

Plan:

Based upon my SFMA findings I decided to attack the greatest areas of dysfunction first. I determined that the hip flexion/posterior chain TED (~40 degrees passive SLR), and cervical flexion & rotation were the patient's greatest limitations. This is what I formulated my initial treatment plan around as well. I began with an easy 5 minute warm-up on a stationary bike followed by some instrument assisted soft tissue mobilization (IASTM) to the posterior neck, proximal hamstrings attachment near the ischial tuberosity and distal attachment of the biceps femoris to prepare for some Muscle Energy Technique (MET).

Day 1: Pain (7/10)

Upper Trap MET

I performed MET techniques (redundancy?) for the upper trap, scalenes, and posterior neck extensors. I performed 3 sets of autogenic isometric inhibition on the right side and an extra set on the left side. This brought cervical flexion and rotation to FN immediately following application of the MET treatment.

I then instructed the patient to perform a couple sets of supine kettlebell carries. Each set lasted until the patient neared fatigue and was unable to retract and "pack" the shoulder/scapula. This was performed bilaterally. Reassessing the upper extremity pattern 1 revealed decreased winging compared with baseline.

MET for the Scalenes

Before Treatment

Next, I performed MET for the posterior hamstrings. Specifically, I also instructed the patient on performing an autogenic isometric inhibitory technique. I performed this bilaterally and found that the patient's passive SLR increased ~20 degrees immediately by the end of treatment.

After Treatment

The patient was unable to attempt rolling exercises due to passive back pain so instead of attempting to restore rolling I had the patient perform some light stretching hip external rotation and calf stretching after having their glutes and gastroc/soleous worked out using a rolling stick by my student.

Easy Hip ER Stretch

Straight Leg Gastrocnemius Stretch - Towel prevents pronation

Bent Knee Soleus Stretch - Towel prevents pronation again

Day 2: Pain (4/10)

The patient returned the second day with increased cervical flexion and rotation patterns but they were no longer functional. I repeated the previous days IASTM and MET techniques and once again these patterns were FN after application. In attempt to prolong these gains, I applied some Rock Tape to the upper traps and scalenes. Once again I had the patient do some kettlebell carries while in a supine position. 

The passive SLR was still increased from the previous day but was still about 15 degrees short of normal. The patient was able to foam roll without increased pain and so I had him foam roll the entire posterior leg chain before IASTM to the aforementioned patterns. Again, we used the previous day's MET application to the hamstrings and this increased the passive SLR to normal.

Due to the patient's ability to have such drastic increases in mobility in such a small amount of time I suspected crucial core stability issues. In attempt to progress this patient quickly I wanted to restore rolling ASAP for the supine to prone upper extremity rolling pattern. I spent about 15 minutes working on rolling with him before calling it a day. Rolling was definitely not perfect but was much better than when we began.

Day 3: No Pain?

On the third day of treatment the athlete returned with FN cervical flexion, and rotation patterns and now Multi-Segmental Flexion was a DN. The athlete reported being sore in the shoulders and hips but no longer was experiencing any pain. We were now about 7 days out from initial injury. I continued to work on rolling patterns and was able to progress to some quadruped and tall-kneeling exercises before the day's end. I could tell that the athlete was very excited to return to basketball so I began his RTP progress with some easy free-throw shooting.

Return to Play and Further Treatment:

Unfortunately, the next day the athlete returned home for spring break and was no longer under my supervision. Despite my best efforts to provide a substantial home-exercise program for this athlete he was so enthused by his progress that he did not stick to his HEP and instead played basketball and rested his entire break.

Upon returning to school the athlete was no longer compliant with his rehab despite the presence his many dysfunctional movement patterns (MSF, MSE, UE #1, MSR, SLS, ODS) and would no longer come for rehab. Reluctantly, I continued to let him participate in practice and JV games. It wasn't because I didn't care about making him better but more because of it being an issue of me being stretched too thin between other athletes that had issues and wanted my help and patients like him that needed my help but wanted none of it because they no longer suffered. It is not an ideal situation but it is the way the world works sometimes. Ideally for me I wish I had been in a position where there was somebody(like a strength coach) that was familiar with the FMS and corrective exercises to help these athletes overcome their dysfunction.

Points of Distinction & Conclusion:

What I thought was interesting regarding this case was the patient's history of traumatic injury to the left scapula and the presence of ipsilateral hypertonic neck muscular and poor scapular stability when compared bilaterally. I do not know if this was present since his previous injury but its hard for me to ignore such a glaring "coincidence" when I see it. When I initially worked with this athlete I had a little contempt for the incomplete rehabilitation that he must have been put through following his previous injuries. 

However, I soon began to feel and conclude that much of this could have been the athlete's own doing and not that of previous clinicians. I even tried the route of touting injury prevention, performance enhancement and how he may be a ticking-time bomb for re-injury and recurrence of back pain. Some people, patients, and athletes just do not seem to want help unless they are physically writhing in pain and unable to walk. I am not sure if this is pride or pure laziness! 

Read More

My SFMA: A Case Study - Multi-Segmental Flexion Breakouts

Today's post is the fourth part of my self-SFMA(Selective Functional Movement Assessment) case study series.  Specifically, We will look at and break out my dysfunctional Multi-segmental Flexion movement pattern from my SFMA Top Tier Post.  

I'm jealous of those that can do this.

Here are the links for the first three posts of this series:
SFMA Top Tier Pattern Assessment

SFMA CervicalSpine Pattern Breakouts

SFMA Upper Extremity Pattern Breakouts

Assessment:

The SFMA works by assessing 7 general top tier movement tests. All tests are rated and ranked by two broad categories of dysfunctional or functional, and then two sub-categorizations of painful or non-painful. This means there are four basic appraisals of FN, DN, FP or DP. From there you perform a "breakout" of each dysfunctional pattern to determine the cause of dysfunction. Dysfunctional movement patterns are broken down using an algorithm that funnels and filters the problem into either a mobility dysfunction or a stability &/or motor control dysfunction (SMCD). 

 

This video will look at the dysfunctional multi-segmental flexion pattern.  Here is the latest breakout video:

Results:

Multi-Segmental Flexion Top Tier = DN (Unable to touch toes. Why? We don't know yet. Other Criteria for passing: Uniform Spinal Curve, Posterior Weight Shift, < 70 degree Sacral Angle)

Single Leg Forward Bend Test = Bilateral DN, yet symmetrical (Still Unable to reach the toes or floor. Why? We don't know yet. Proceed to the next test.) 

This test helped to determine if the forward bend was an asymmetrical or symmetrical dysfunction…in the presence of pain with the top tier assessment we could also use this test to check for symmetry with pain provocation.

Long Sitting Test = DN (Still unable to reach toes. Why? I don’t know yet but we did pick up on a few things.)

We still do not have a clear cause of dysfunction yet, however we do know that I cannot touch my toes and I do have < 80 degree Sacral Angle. This would indicate limited hip flexion and/or limited spinal flexion, or both.

If I had been FN with this test we would have proceeded to the rolling patterns to check for a fundamental motor control dysfunction.

Active Straight Leg Raise Test: Right=DN, Left=DN (Looking for at least 70 degrees of Hip Flexion)

Passive Straight Leg Raise Test: Right=DN, Left=DN (Looking for at least 80 degrees Hip Flexion and to be within 10 degrees of the Active SLR)

It is observed that my passive SLR has more than a 10 degree difference from the active SLR. This would indicate a possibility of a core stability, hip flexion strength problem, excessive hamstring tone, guarding or a hip mobility dysfunction.

Supine Knee to Chest Holding Thighs Test = DN (Unable to bring knees and thighs to chest while supine.) This test is used to check the mobility of the hips while they are in an unloaded or non-weight-bearing position. Doing this also helps to differentiate a difference between hamstring mobility and hip mobility dysfunctions.

Breakout Findings: If we follow the breakouts one would deduce that I have a hip joint mobility dysfunction or a posterior chain tissue extensibility dysfunction or both…as well as a possible hip flexion strength or SMCD dysfunction. But that isn’t as important considering that we would need to treat the mobility dysfunction before addressing any SMCDs.

Do you have any ideas/suggestions/thoughts? Let me know in the comments below!

Read More

My SFMA: A Case Study - Upper Extremity Breakouts

Today's post is the third part of my self-SFMA(Selective Functional Movement Assessment) case study series.  Specifically, We will look at and break out any dysfunctional upper extremity movement patterns from my SFMA Top Tier Post.  


In the first post/video, I was dysfunctional/non-painful (DN) for the Upper Extremity Pattern One (Combination of Extension/Adduction/Internal Rotation of the shoulder).  However, I was functional/non-painful (FN) for Upper Extremity Pattern Two (Combination of Flexion/Abduction/External Rotation of the shoulder). In case you missed it, here are the 7 top tier tests again. You can also check out the cervical spine patterns and breakout assessment here.

Read More

My SFMA: A Case Study - Cervical Breakouts

Time to make an assessment of myself

Today's post is second part of my self-SFMA(Selective Functional Movement Assessment) case study series.  Specifically, We will look at the dysfunctional cervical spine movement patterns from my SFMA Top Tier Post.  In the first post/video, I was dysfunctional/non-painful (DN) for the Cervical Flexion Pattern, and the Cervical Rotation Pattern to both the Right & Left.  However, I was functional/non-painful (FN) for Cervical Extension. In case you missed it, here is the 7 top tier tests again.

The SFMA works by assessing 7 general top tier movement tests. From there you perform a "breakout" of each dysfunctional pattern to determine the cause of dysfunction. Dysfunction movement patterns are broken down using an algorithm that funnels and filters the problem into either a mobility dysfunction or a stability &/or motor control dysfunction (SMCD).

Assessment:
This video will look at the dysfunctional cervical spine patterns. Specifically, cervical flexion and cervical rotation to the left and right. I was functional for the cervical extension pattern so that pattern does not require a breakout assessment. Here is the breakout video:

Results:
Cervical Flexion Top Tier = DN (Unable to bring chin to sternum. Why? We don't know yet.)

Active Supine Cervical Flexion Test = DN (Still Unable to bring chin to sternum. Why? We don't know yet.)
If I was now FN we would know that there is a postural and motor control dysfunction or stability/motor control dysfunction...or both, affecting cervical flexion. This includes the c-spine, T-spine, and shoulder girdle postural dysfunction. Laying supine removed the postural and stability requirements of the gravity dependent/loaded standing position from the top-tier tests

Passive Supine Cervical Flexion Test = FN (Chin is now to sternum)
We can now assume the cause of the dysfunction was due to an active cervical spine flexion stability dysfunction or motor control dysfunction...or both. We know it is not a mobility issue because I had full motion when all stability and motor control requirements were removed and the movement was performed passively. If it was due to mobility reasons then my GF would not have been able to passively bring my chin to my chest. Mobility problems always present with consistent findings!

Cervical Rotation Top Tier = DN to the Left & Right (Can not rotate chin to mid-clavicle or at least 80 degrees, Why? We don't know yet)
This test no longer requires this degree of rotation and the ability to bring the chin to the clavicle, at least this is how I was instructed in October of 2013.

Active Supine Cervical Rotation Test = FN (At least 80 degrees of rotation bilaterally without a significant asymmetry)
We now know that the dysfunction was related to a postural and motor control dysfunction or a stability and motor control dysfunction...or both. This is why my top tier cervical spine rotation test was dysfunctional, not because of my perceived tissue "tightness."


Treatment:
It is said that there are many ways to skin a cat...that being said the SFMA is a tool or a system of assessment. It is not a specific approach to treatment. However, there are general guidelines based off of the findings and it also lays a road map of treatment for you(eg. mobility before stability, working your way down the top tier tests). Specifically, in my case I do not have any mobility dysfunctions within the cervical spine but if I follow the philosophy of the SFMA then I need to address the SMCD of the cervical flexion pattern before attempting to correct SMCD dysfunction of the cervical rotation.

There are many avenues for treating this dysfunction from dry needling to IASTM to MDT principles to using the 4x4 Matrix or etc. I can't advocate that one approach will be better for addressing my dysfunction than another...but I do have a system of assessment to judge the efficacy of each potential intervention. Perhaps IASTM and MDT combined will work great for 90% of my patients but I don't know that...all I need to know is how to assess-intervene-reassess. Oh and I should probably stay within my practice act, so use what tools you have and those that you are comfortable with.

Thoughts? Do you think my breakouts and assessment have been accurate so far? What would you do with me? I know what I would do....finish the SFMA breakouts, first. Come back as I continue to break out my many dysfunctional movement patterns.

Read More

My SFMA: A Case Study - Pt. I

Howdy again Readers! Today will be the first part of a series of posts that I am lamely labeling "My SFMA." Each post will feature a video related to my own personal Selective Functional Movement Assessment (SFMA). Today's video will showcase my own seven top tier SFMA tests. Each additional blogpost and video will showcase a single dysfunctional top tier test derived from this initial video. In those videos I will perform the appropriate breakouts according to the SFMA to determine the reason for failing each individual top tier test and will discuss ways of treating these issues.

The idea behind this came from the fact that I am going to start increasing my physical activity levels, getting into better shape, and eventually getting back to marathon training. Working on preventing injuries is always easier than taking time away from exercise or training to work on treating injuries.

I also thought that doing this would help me to practice more with the SFMA system and will allow me to receive guidance or feedback from others with experience using the SFMA. If you watched the video it is obvious that I have a lot of preventing...or maybe I should say correcting to do. To find out and discuss what/how I should address, don't forget to come back for part II!

Read More

1 Month of The SFMA: My Reflections

It has now been exactly a month since I took the Selective Functional Movement Assessment certification course in St. Louis, MO. You can read my initial course review here. I have been trying to incorporate the SFMA into my clinical practice as much and as often as possible since then. I wanted to take the time to highlight some thoughts and self-reflections from this process so far.

Read More

The SFMA Course Review, 9/5/13-9/6/13

This past weekend I had the pleasure of attending the Selective Functional Movement Assessment(SFMA) certification course in St. Louis, Missouri. More specifically, the course was hosted on the beautiful campus of Logan Chiropractic College/University.  Logan did a great job of hosting this seminar and they were very accommodating and even had snacks/refreshments/coffee available. The only thing I could think to gripe about was my poor cellphone service in the basement classroom that we used. ;)

I was first introduced to the SFMA by a mentor of mine during my senior year of my undergraduate when he attended an SFMA course himself. He gave me some background about what it was and what they were trying to teach and ever since then I had wanted to learn it myself. Reading the book Movement by Gray Cook and becoming FMS certified didn't help my anxiousness either.

For those of you that don't know what the SFMA is..."The Selective Functional Movement Assessment (SFMA) is a series of 7 full-body movement tests designed to assess fundamental patterns of movement such as bending and squatting in those with known musculoskeletal pain. When the clinical assessment is initiated from the perspective of the movement pattern, the clinician has the opportunity to identify meaningful impairments that may be seemingly unrelated to the main musculoskeletal complaint, but contribute to the associated disability. This concept, known as Regional Interdependence, is the hallmark of the SFMA.

The assessment guides the clinician to the most dysfunctional non-painful movement pattern, which is then assessed in detail. This approach is designed to complement the existing exam and serve as a model to efficiently integrate the concepts of posture, muscle balance and the fundamental patterns of movement into musculoskeletal practice. By addressing the most dysfunctional non-painful pattern, the application of targeted interventions (manual therapy and therapeutic exercise) is not adversely affected by pain." -SFMA.com

Read More